If you’re wondering whether your students are paying attention during your online lectures…they’re not.
“I’m waking up and then falling asleep again in Zoom classes.” – Xavier University Student
To be clear, this isn’t your fault or your students’ fault. The way screen sharing works on video conference platforms (where students see your slides fullscreen but only a tiny thumbnail of your webcam) means it’s near impossible for anyone to pay attention during a slide-based online lecture.
But you can easily change that. Using free, open source software, you can do what news and TV shows have done for decades:
Show facts and faces side-by-side.
When students can see your face, they can read your non-verbal cues to see how passionate you are and how important a subject is. Combine that with the fact that human faces are naturally engaging, and you can start lecturing online in a way that’s not only more interesting to your students, but more fun for you – at least it has been for me :).
How to Combine your Slides and Webcam
We will show you, step-by-step, how to combine your slides with your webcam to create engaging experiences for your students when listening to your lectures online.
Step 1: Create Test Slides
Create slides that have a green screen built into them, which means you will add an area (your green screen) that you will eventually replace with a video output (your webcam). To do this, in PowerPoint:
- Click “Insert” on the top menu
- Click the “Shapes” option
- Select the square shape option.
Draw a square box over half of a blank slide. Then fill that box with a bright green color, using RGB color codes 0 for Red, 255 for Green, and 0 for Blue. You then want to send your green screen to the back by right-clicking, and selecting “Save to Back” from the menu that pops up. Finally, move the text box on the slide to the other half of the slide so it does not overlap with the green screen half.
Keep the PowerPoint window open and move it to the left half of your screen.
You can also download sample slides here.
Step 2: Create Video Output
Now download OBS Studio, which is a free, open-source software that will enable the green screen effect. You’ll first want to set up your video output in OBS. To do this
- Click on “File” in the top left corner
- Click on “Settings” in that File menu
- Click on “Video” in the menu on the left
- In the top box labeled “Base (Canvas) Resolution”, make sure it is “1920 x 1080”
Now you want to add a new video source. In the “Sources” box at the bottom:
- Click the + button
- Click “Video capture device” from the menu that pops up
- Name the device in the top line of the box that pops up (“Webcam” for instance)
- Click “OK”
- In the next pop-up box, select your webcam in the “Device” box
- In the “Resolution/FPS Type” box, if your webcam allows output at different resolutions, you will want to select the same resolution you selected in the OBS video output (in this case, “1920 x 1080”)
- Click “OK” and you should see your webcam output with a red box around it in the OBS window.
Next you want to add a specific window to your OBS video output as a source. In this case, that window will be your PowerPoint slides. To do this, in PowerPoint:
- Click on the “Slide Show” menu at the top
- Click on the “Set Up Slide Show” menu
- Click on the “Browsed by an individual (window)” radio button
- Click “OK”
- Start your slideshow
Next you want to tell OBS to put the window showing your PowerPoint slide on top of the output from your webcam. To do this, in the Sources box of the OBS window:
- Click the + button
- Click “Window capture” from the drop-down menu
- Name the output (maybe “Slides”)
- Click “OK”
- OBS will provide you with a set of windows you can potentially capture and lay over the webcam output. Click the drop-down menu labeled “Window” and select “PowerPoint Slideshow Presentation”
- Click “OK”
You will now see the slideshow on top of your webcam output, with a red box around it. Drag the edges of the red box to make the slide show window the entire OBS output. You can then resize the original slide show (on the left half of your screen) to get rid of any black bars or elements around the edges you don’t want visible.
The next step is to get rid of the green screen. To do this:
- In the OBS window, in the Sources box, right-click on the “Slides” source (or whatever you named your slides file)
- Click “Filters” from the drop-down menu
- Click the + on the bottom left of that window that opens
- Click on “Color Key” from the drop-down menu
- Name the Color Key in the box that pops up (for example, “Greenscreen”)
- Click “OK”
You will see that the green part of the slideshow screen has been eliminated. If you see a slight green line between the two halves of the slides showing in the OBS window, you can slide the “Similarlity” slide to the right until that disappears. Click “Close” and you should see the right half of your slides visible and your webcam visible on the left half of the OBS window.
The next step is to move the webcam window. Click and drag the webcam output to the left until your face is positioned in the left half of the OBS window.
Now you can advance the PowerPoint slides by clicking on the Powerpoint window, and advancing the slides as you normally would. What you will see is in the OBS window, on the right side, the slides are advancing while the webcam output stays in place.
One advanced step is to an audio source in OBS. To do this:
- Click the + button in the Sources box at the bottom.
- Click the “Audio Input Capture” in the drop-down menu
- This will be to capture your microphone, so name it accordingly (i.e., “Microphone”)
- Click “OK”
- In the pop-up window, select whatever microphone you normally use, then click “OK”
This isn’t necessary to capture the slide and webcam videos in OBS. However, you also have the capability to record videos in OBS. If you wanted to record any lectures/lessons in OBS, now you would have the capability to capture the screen and your audio – you would just click the “Start Recording” button in the Controls box in the OBS window.
Step 3: Send Video Output
You now have OBS set up to produce the output you want. The next step is to send that output to the places you want it sent. You have two basic options to make this happen.
Option 1: Virtual Camera
This option includes a piece of software that takes your OBS output and makes it look like it’s a normal webcam to any video conferencing software (Zoom, Webex, etc.) To enable this, all you need to do is select OBS as the video output (instead of your normal webcam) within your video conferencing software. This is the optimal solution, but it doesn’t always work seamlessly with every combination of operating system and video conferencing software. For instance, this works great for Windows and Zoom, but at the time of this post, Macs don’t support virtual cameras by default, so this isn’t the optimal solution for Macs.
- Install the VirtualCam plugin from here (click the “Go to download” link on the right side of the page).
- When the install is finished, in OBS, click “Tools” at the top
- Click “VirtualCam” from the drop-down menu
- Click “Auto Start” in the box that pops up
- Slide the “Buffered frames” slide all the way to the left so it is at 0
- Click “Start”
Macs: You can follow the instructions in this video.
Note: There are some security implications involved with disabling System Integrity Protection required for this technique that are outside the scope of this article, so be sure you and/or your IT team are comfortable with those before proceeding.
This has now enabled your virtual camera to send the output to any service that wants to use your camera. To check whether this is working, open your video conferencing software (i.e., Zoom, Webex). Start a new meeting.
If your video conferencing window overlaps with your PowerPoint window, it will show up in your OBS output window. To prevent this, drag or shrink your video conferencing window so it does not overlap with your PowerPoint window, so in your OBS output window all you see is your webcam output (your face) and the non-greenscreen part of your slides.
We recommend you downsize the OBS window and enlarge the video conferencing window. But when doing this, make sure nothing overlaps with the PowerPoint window.
Click the appropriate buttons to start your video in your video conferencing window. The camera you want to select in your video conferencing software is the “OBS Camera”. You should see the OBS output is now showing in the video conferencing window.
Option 2: Screen Sharing OBS Preview Window
In the OBS output window, right-click in the grey section to the left of your face. Select “Windowed Projector Preview” from the drop-down menu. What this gives you is a window that previews the OBS output. You can adjust that window size to eliminate any sort of black bars or “blank” space around the edges.
In your video conferencing window, instead of using “OBS Camera” as your video output, you can select “Screen Share” (in Zoom) and select the “Windowed Projector Preview” screen. You will see a green box around the “Windowed Project Preview” box, which means that is what is being sent out via the video conferencing Screen Share.
Step 4: Add Some Flair to your Slides
Just as you do in class, you want your presentations to be dynamic and engaging for your students. You can do this by adding small elements to your presentation.
You might add your school colors to the presentation. Use larger, more interesting fonts. You can also experiment with moving the greenscreen portion around on your slides to shift where your webcam output shows up. Maybe you add that to the bottom corner of your slides, and you can look up at the text as it flies into your slides.
You now have the capability to create dynamic, engaging presentations for your students. Experiment with what OBS can do to bring your lectures and presentations to life!
If you haven’t already registered, remember to join us at the:
Engaging Students Online:
A Virtual Conference
Last week we opened registration to a virtual conference dedicated to engaging students online. So far, 350+ entrepreneurship educators have registered. We hope you join us!